? epcos ag 2009. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw gps extractor filter gps extractor series/type: ordering code: b7742 B39162B7742E310 date: version: april 24, 2009 2.3
2 april 24, 2009 b7742 1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 mhz please read cautions and warnings and important notes at the end of this document. saw components saw gps extractor filter data sheet application n low loss rf gps extractor filter for mobile phones using common antenna for gps and cellu- lar/pcs/k-pcs/wcdma/bluetooth band n placed between antenna, gps and cellular/pcs/k- pcs/wcdma/bluetooth band n no switches and control lines required n integrated low loss gps filter with single ended out- put 50 w n very low insertion attenuation in gps and non- gps band n high selectivity of gps filter n low amplitude ripple in all bands n usable passbands 2 mhz (gps), 70 mhz (cellular), 120 mhz (k-pcs), 140 mhz (pcs), 60 mhz (wcdma band i), 83.5 mhz (bluetooth) features n package size 2.5 x 2.0 x 0.68 mm 3 n package code dcs6n n rohs compatible n approximate weight 0.015 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) pin configuration n 1 input antenna n 3 output gps band n 6 output non-gps band (cellular/k- pcs/pcs/wcdma/bluetooth band depend- ing on external matching) n 4 to be grounded n 2,5 ground 1 2,5 4 6 3
3 april 24, 2009 b7742 1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 mhz saw components saw gps extractor filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics matching circuit 1 1) : all bands + gps (1575.42 mhz) temperature range for specification: t = -30 ?c to +85 ?c terminating input antenna impedance: z ant =50 w || 6.8 nh terminating gps impedance: z gps =50 w terminating non-gps impedance: z ngps =50 w || 6.8 nh 1) further matching circuits are specified in b7742 appendix b7742 min. typ. @ 25 ?c max. maximum insertion attenuation a max antenna-gps 1574.42 ... 1576.42 mhz 1.1 1.6 db antenna-non-gps 824.0 ... 960.0 mhz 0.8 1.3 db antenna-non-gps 1710.0 ... 1990.0 mhz 0.8 1.3 db antenna-non-gps 2110.0 ... 2170.0 mhz 1.1 1.5 db antenna-non-gps 2400.0 ... 2483.5 mhz 1.1 1.6 db attenuation a antenna-gps 824.0 ... 960.0 mhz 33 39 db antenna-gps 1710.0 ... 1990.0 mhz 33 37 db antenna-gps 2110.0 ... 2170.0 mhz 33 37 db antenna-gps 2400.0 ... 2483.5 mhz 35 39 db vswr (antenna port) gps band 1574.42 ... 1576.42 mhz 1.3 1.8 non-gps band 824.0 ... 960.0 mhz 2.0 2.5 non-gps band 1710.0 ... 1990.0 mhz 1.4 2.0 non-gps band 2110.0 ... 2170.0 mhz 1.6 2.1 non-gps band 2400.0 ... 2483.5 mhz 1.8 2.4 vswr (gps port) gps band 1574.42 ... 1576.42 mhz 1.2 1.8 vswr (non-gps port) 824.0 ... 960.0 mhz 2.0 2.5 1710.0 ... 1990.0 mhz 1.4 2.0 2110.0 ... 2170.0 mhz 1.6 2.1 2400.0 ... 2483.5 mhz 1.8 2.4 isolation between non-gps and gps path a 824.0 ... 960.0 mhz 33 37 db 1710.0 ... 1990.0 mhz 33 37 db 2110.0 ... 2170.0 mhz 33 37 db 2400.0 ... 2483.5 mhz 35 40 db gps ant cellular non-gps (all bands)
4 april 24, 2009 b7742 1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 mhz please read cautions and warnings and important notes at the end of this document. saw components saw gps extractor filter data sheet antenna - gps (transfer function for matching circuit 1): antenna - gps (transfer function passband for matching circuit 1):
5 april 24, 2009 b7742 1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 mhz saw components saw gps extractor filter data sheet please read cautions and warnings and important notes at the end of this document. antenna - non-gps (transfer function for matching circuit 1, all bands ): antenna - non-gps (isolation, transfer function for matching circuit 1, all bands ):
6 april 24, 2009 b7742 1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 mhz please read cautions and warnings and important notes at the end of this document. saw components saw gps extractor filter data sheet smith charts / vswr (for matching circuit 1, all bands ) s 11 antenna s 22 gps s 33 non-gps
7 april 24, 2009 b7742 1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 mhz saw components saw gps extractor filter data sheet please read cautions and warnings and important notes at the end of this document. maximum ratings operable temperature range t C30/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at 824 ... 960 mhz p in 31 dbm 1710 ... 1990 mhz p in 31 dbm effective power in the on-state 1850 ... 1990 mhz p in 31 dbm continuous wave signal 2400 ... 2483.5 mhz p in 31 dbm
8 april 24, 2009 b7742 1575.42 / 859 / 1810 / 1920 / 2140 / 2441.75 mhz please read cautions and warnings and important notes at the end of this document. saw components saw gps extractor filter data sheet references type b7742 ordering code B39162B7742E310 marking and package c61157-a7-a116 packaging f61074-v8153-z000 date codes l_1126 s-parameters (unmatched) b7742_nb.s3p b7742_wb.s3p soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2009. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
9 april 24, 2009 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be avail- able. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, dssp, miniblue, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, siferrit, sifi, sikorel, silvercap, simdad, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other coun- tries. further information will be found on the internet at www.epcos.com/trademarks.
|
